Supplier Homepage Motor Electric Motors DC motor 6600V/11000V Yrks Large-Scale High-Voltage Slip Ring Water-Cooled Motor

6600V/11000V Yrks Large-Scale High-Voltage Slip Ring Water-Cooled Motor

Purchase Qty. / Reference FOB Price

Production Capacity:
Payment Terms:	LC, T/T

Send Inquiry

Basic Info

Product Description

Model NO.

Yrkk900-10-2800kw

Number of Poles

Starting Mode

Serial Rotor Resistance Starting

Certification

ISO9001, CCC, Ce

Brand

China Motor

Voltage

3kv/6kv/6.6kv/10kv/11kv

Protection

IP44 or IP54,IP55

Nsulation Class

Output Power

2800kw

Cooling Method

IC81W

Duty

Frequency

50Hz/60Hz

Stator Winding

100% Red Copper

Rotor Winding

100% Red Copper

Driving

Steel Rolling Mill, Cement Mill,Sugar Rolling Mill

Trademark

ZCL

Transport Package

Plywood Case

Origin

Shijiazhuang, China

HS Code

8501530090

The YRKS large-scale motor is a high-voltage wound-water-cooled three-phase asynchronous motor. The power class, installation dimensions and electrical performance of this type of motor are in compliance with relevant IEC standards. The basic installation method of the motor is the horizontal bottom angle (IMB3), the working system is the continuous working system (S1), and the wound rotor is made of Class F insulation material.
YRKS large slip ring motor bearings are divided into two types, rolling bearing and sliding bearing, depending on the motor power and speed. The rated frequency of the motor"s power supply is 50Hz, the rated voltage is 6000V/10000V, and the basic type of protection is IP54. The motor slip ring housing can be protected to IP22 or IP23. Other voltage, frequency and degree of protection motors are also available upon request.
YRKS large water cooler motor addition set, bearing temperature measuring device, can also add heating device inside the motor, the shaft extension of the motor uses the tangential key, the motor carbon brush is not lifting structure, the front and rear bearing chambers of the motor have Oil filling and oil draining device.
YRKS large slip ring motor can be used to drive various kinds of machinery, such as compressors, pumps, crushers, cutting machine tools, transportation machinery and other mechanical equipment, in mining, machinery industry, petrochemical industry, power plants and other industrial and mining. Used as a prime mover in an enterprise. The motor used to drive the blower, coal mill, rolling mill and winch should indicate the purpose and technical requirements when ordering, and adopt special design to ensure reliable operation.

Center height range: H400 ~ 1000mm
Power range:200kW ~ 12000kW
Number of poles: 4/6/8/10/12
Rated voltage: 6000V/6600V/10000V/11000V
Rated frequency: 50HZ/60HZ
Protection level: IP54 or IP55
Insulation class: F
Work system: S1 (continuous)
Cooling method: IC81W
Installation form: IMB3
Motor connection: Y (three outlet terminals in the junction box, the junction box from the extension of the spindle is located on the right side of the base)
Altitude: no more than 1000m
This type of motor is suitable for use in environments where the ambient air temperature does not exceed 40 ° C and there is no serious dust, the minimum ambient air temperature is -15 ° C, and there is no corrosive and explosive gas in the air (which can also be made into a damp heat or high-altitude motor).

YRKS large high-voltage wound rotor slip ring motor can increase the starting torque at a small starting current. The motor is suitable for applications where the capacity of the feeder line is insufficient to start the squirrel-cage rotor, the starting time is long, the starting is frequent, and the small-range speed regulation is required. This series of motors has the advantages of high efficiency, energy saving, low noise, low vibration, light weight, reliable performance, convenient installation and maintenance.

The motor products manufactured by our company have obtained the ISO9001 quality management management system certification, passed the CCC/COC, China energy-saving product certification, and passed the certification certificates of CE/UL/IRIS/CAS and other European and American countries. The company strictly improves the quality and efficient motor products and services for users in strict accordance with the requirements of relevant product standards.

Main process flow of the motor
Motor stator: casing processing → punching press → iron core seating → coil making → weaving → dipping paint drying
Electronic rotor: blank shaft processing → iron core press installation → iron core cast aluminum → rotor string shaft → weave → dipping paint drying → dynamic balance
Motor assembly: stator rotor assembly → machine test → motor appearance coloring → packaging storage

The company insists on providing high-quality motor products and services to users, and has won high praise from many domestic and foreign customers. The company will receive many foreign merchants to visit our factory every year, and establish a good cooperative relationship through on-site inspection of our factory. Our company always welcomes customers to visit our factory.